FabriVISION Features

  • Reduce first article inspection time up to 96%.
    Increase production capacity and reduce the cost of rejects.
    Reverse engineer existing parts into CAD files.
    Automatic report generation.
    Direct CAD interface to FabriWIN, AP100, DWG, DXF & IGES.

 

 

         
 
Fully Dimensioned CAD comparison

Predefined Tolerance settings (Color Coded) show the deviation of a scan compare to a validated CAD file.
FabriVISION samples thousands of points for a true 100% inspection of all parts features.

    
Color Comparison

Predefined Tolerance Settings (Color Coded) show the deviation of a scan compared to a validated CAD file.

 
 
             
           
 
Zoomed View - Tolerance Display

Individual part feature tolerances can be applied & saved with a part file.

 

    
Missing Hole Feature

FabriVISION will detect missing entities on the scanned part and display these items in red.
 
             
           
 
Automatic Inspection Reports

Automatic generation of inspection.
Display CAD dimension,
Actual dimension and deviation.
A "Status" column indicates any dimensions that require further inspection.
Reports can be set to accumulate data for statistical process control (SPC).

 

    
Hole Deviation Report

Displays X and Y positions of all hole features as well as deviation from nominal dimamer.
Automatically calculates diameter zone, also known as true position.
All FabriVISION reports can be transmitted to your customers via e-mail, including color comparison.
 
             
           
 
Collect data for Statistical Process Control (SPC)

FabriVISION has a direct interface to ASI SPC software.

 

    
Reverse Engineering

Quickly convert scanned parts into CAD drawings with FabriVISION's digitizing capability.
CAD models are automatically saved as FabriWIN part files.
CAD models can also be exported via DXF, IGES.